Not only does musl lack separate broken-down libraries like libpthread, libm, librt, etc. that glibc has; even the dynamic linker (in the elvish language, "program interpreter") is unified with libc.so. This design helps achieve at least four goals:
In the early design stages of musl, it was unclear whether musl would provide its own dynamic linker or use an existing one. The initial motivation for providing its own was to eliminate the bloat costs of dynamic linking, but during development, the other, more compelling reasons became apparent.
A classic Linux system (glibc or even back to libc5) gives the illusion that the dynamic linker, libc, and threads implementation are separate components, and that you could swap out any of these for an alternate implementation while keeping the others. In a sense this was true at some point, before any of them really worked properly. But now they are all extremely interdependent, and burdened by their dependencies on one another's private interfaces. Some examples:
The key reason musl needed its own dynamic linker was that glibc's dynamic linker was too tied in to the workings of glibc, and particularly into designs (for library loading and TLS) that could not be made robust without completely replacing them. With the decision to include a new dynamic linker made, but without a preexisting API design to link it with libc and threads, the most practical choice was to have it all be part of one library, and avoid the difficult (and useless) problem of creating a long-term API/ABI between components. This also greatly simplified the dynamic linker design and implementation.
Adapted from http://www.openwall.com/lists/musl/2011/04/18/1
The current thread cancellation design in musl is the second in a series of designs to rememdy two critical flaws in the classic way cancellation is implemented by glibc and other libraries:
At the time this system was designed, there were mixed opinions on whether these flaws are violations of the POSIX requirements on cancellation. Now, based on the resolution to issue 614 on the Austin Group tracker (http://austingroupbugs.net/view.php?id=614), it's clear that POSIX does have very specific requirements for the side effects of functions when they are cancelled. Either way the above flaws make it virtually impossible to use cancellation for the intended purpose. Both flaws stem from a cancellation-point idiom of:
1. Enable asynchronous cancellation. 2. Perform the operation (usually a syscall). 3. Disable asynchronous cancellation (actually restore the old state).
The first idea to remedy the situation appeared in musl 0.7.5, but turned out to have its own set of flaws. The new approach, which works like this:
A specialized version of the syscall wrapper assembly code is used for cancellation points. Originally, it recorded its stack address and a pointer to the syscall instruction in thread-local storage, but this approach turned out to have some flaws too, and eventually it was simplified to just use externally-visible labels in the assembly code. The cancellation signal handler can then compare the instruction pointers of the interrupted context to determine at which point the cancellation request came:
In the first case, cancellation is immediately acted upon. In either of the second two cases, the cancellation signal handler re-raises the cancellation signal, but leaves the signal blocked when it returns. The cancel signal can then only be unblocked in the third case, when a previously-executing signal handler returns and restores its saved signal mask. This will immediately trigger the cancellation signal again, and it can inspect the context again. If there are multiple layers of signal handlers between the original cancellation point and the cancellation signal handler, each one will be peeled off in this way as they return, and the cancellation request will propagate all the way back.
Surprisingly, this entire cancellation system has very few machine dependencies, beyond the need for machine-specific syscall code which was already a requirement. Everything else is written in plain POSIX C, and makes only the following assumptions:
For comparison, an earlier attempt as this design depended on an arch-specific macro to read code from the saved instruction pointer and inspect for the syscall opcode. This turned out to be the wrong approach for several reasons.
One limitation of this whole design, on plain x86 (not x86_64), is that it is incompatible with the "sysenter" method of making syscalls. Fortunately, relatively few syscalls are cancellable, and there is no reason the non-cancellable majority of syscalls could not use the "sysenter" syscall method.
Aside from the correctness benefits, the new cancellation implementation has been factored to avoid pulling cancellation-related code into static-linked programs that don't use cancellation, even if they use other pthread features. This should allow for even smaller threaded programs.
The TLS implementation in musl is based on the principle of reserving all storage at a time when failure to obtain storage is still reportable. This is in contrast to other implementations such as glibc which are forced to abort when lazy allocation fails.
There are only two operations which can increase a process's TLS needs: pthread_create and dlopen. During dlopen, a lock is held which prevents the creation of new threads, so dlopen can use the current thread count to allocate sufficient storage for all currently-running threads at the time the library is loaded; if storage cannot be obtained dlopen returns failure. Before releasing the lock that prevents thread creation, dlopen updates the record of how much TLS storage new threads will need and makes it available future calls to pthread_create, which pre-allocate storage for TLS in all libraries that were loaded at the time of the call.
Before a new thread begins execution, TLS pointers are already setup, and the TLS images have all been copied, for TLS belonging to libraries that were loaded before the thread was created. If a thread attempts to access TLS in a library that was loaded after the thread started, the __tls_get_addr function searches the list of loaded libraries to find the pre-allocated storage that was obtained when the library was loaded, and uses an atomic-fetch-and-add operation to adjust the index into this storage. This makes access to the pre-allocated storage both thread-safe (since other threads might need to acquire part of it) and async-signal-safe (important for supporting the case where the first access to a library's TLS takes place in a signal handler or after forking).
One consequence of this design is that there is memory which is never freed. However, the point at which this memory is allocated is in dlopen, an interface which inherently allocates an unfreeable (in musl, for various good reasons) resource: a shared library. If for some reason there exists an extreme, unusually large number of threads at the moment dlopen is called, however, the permanent allocations could be costly. It may be possible to arrange for some or all of this memory to be freeable upon thread exit, by carving up the large allocation into individual pieces returnable to the malloc subsystem via free. Such enhancements will be considered at a later time if there is demand.
Adapted from http://www.openwall.com/lists/musl/2013/07/16/16
Internally, all POSIX times (seconds since epoch) are passed around as long long. This ensures that values derived from struct tm, timezone rules, etc. can never overflow, and allows overflow checking to be deferred until it's time to convert the value back into time_t. Without this design, handling the "partial years" at the edge of time_t overflow range is very difficult, as is handling the denormalized struct tm forms mktime is required to support and normalize (for instance, overflowing the year range by using a very large month number).
Instead of converting back and forth to broken-down struct tm for applying timezone rules, the new code simply converts the combination of year and TZ rule string to a POSIX time within the given year at which the transition occurs. This value has type long long so that it cannot overflow even at the boundary years. Determining whether DST is in effect at a given time is simply a range comparison, just like the comparison used for processing zoneinfo-format timezone rules.
For years within the currently-reasonable range/32-bit time_t, the hot path for converting a year to seconds since the epoch involves no division. We can get away with >>2 and &3 since in the range [1901,2099] the leap year rule is simply that multiple-of-4 years are leap years. I would like it be able to have the compiler throw away the larger, slower, general-case code on 32-bit-time_t targets, but unfortunately the need to use long long internally to avoid difficult corner cases is precluding that.
Any representable struct tm will successfully convert to time_t if and only if it represents a value of seconds-since-the-epoch that fits in time_t. Any representable time_t will successfully convert to struct tm if and only if it represents a (normalized) date and time repr esentable in struct tm. The relevant functions will avoid setting errno except on error so that a caller can distinguish between a time_t value of -1 as a valid result and as an error.
You can contribute to this wiki! Submit pull-requests to somasis/musl-wiki.
This work is licensed under a Creative Commons Attribution-ShareAlike 3.0 Unported license, unless otherwise noted.
Last edited by Kylie McClain, 2016-07-01 16:55:02